1. All glass must be removed from cab including lights
and mirrows.
2. Any sharp or protruding items need to be flattened or removed.
3. Iron spears or external iron used for aggressive action is prohibited.
4. Radiators, transmission coolers must remain in original location
or be removed.
5. Fan shrouds may be removed.
6. Electronics mal be altered.
7. Fuel cell must be placed inside grain tank with a no spill type
cap.(keep safty in mind)
8. Combine must have reinforced cab with door chained ,wired or welded
with adequate roll-over protection.
open combines must have a cage for protection must be strong enough
so another combine can not get to driver.
Make a good sturdy cage or you will not be running.
9. Batteries must be secured in safe area such as grain tank or engine
compartment.
10. Grain tables 18' or smaller only, no corn heads, cutting system
and reel to be removed.
11. No extra strength can be added to machine such as platform, rear
axel, frame etc. Exception: Bracing
can be added from combine feeder house to edge of platform, not to
exceed the original width of the platform.
Rub bars may be placed around the variable drive, hydro-lines and radiator
and rear steering cylinder.
12.Grain table must be permanently locked and cylinders removed at
a height of 18" to 24" at bottom of table.
13.Rubber tires only, no duals, tracks or calcium chloride filled tires
(no hazardous materials)
14. Discharge augers, cab ladder, separator drive belt and straw choppers
must be removed.
15. No excessive welding. you may be required to remove parts.
16. If header comes off you will be diqualified.
17. Combines will be inspected after registration. No modifications
will be allowed after inspection.
Combines may be repaired after heat.
These rules are subject to change with out notice by judges..
any questions please call (217) 306-4027
HOME
SCHEDULE
STOCK
RULES
MODIFIED RULES
COMPACT RULES
MINIVAN RULES
TRUCK RULES
RESULTS
EMAIL